Topic
How ForestVPN works, step by step
What happens between pressing connect and your first page loading: the handshake, the route, the sign-in number and what each part can see.
- October 29, 2026 · 9 minutes read
WireGuard keepalive: PersistentKeepalive = 25
What PersistentKeepalive = 25 does, which peer sets it, how to pick the keepalive interval, and a test run of inbound packets dying behind a NAT without it.
- October 29, 2026 · 9 minutes read
WireGuard MTU: what to set and why 1420
Why the WireGuard MTU default is 1420, how to find the real value on your path with a DF ping, and a test run of what stalls when large packets are dropped.
- October 16, 2026 · 10 minutes read
IPv6 leak: how it happens and how to test
An IPv6 leak is IPv6 traffic that skips the tunnel. How it happens, how to test for one, and what our own phone run showed with the tunnel down and up.